| 标准库 | 种类 | 厂家 | 信息 |
|---|---|---|---|
| Rilsan® BMNO P40 TL | 尼龙 11 | Nylon 11, plasticized, heat stabilized. Please contact Atofina for additional information. |
|
| Maxelast® P2945T | TPE | Maxelast® P2945T是一种热塑性弹性体(TPE)材料,。 该产品在北美洲、欧洲或亚太地区有供货,。 Maxelast® P2945T的典型应用领域为:工程/工业配件 |
|
| Precision Polymer Z85L | NBR | Z85L is a peroxide-cured, HNBR compound specially developed for service in low temperature applications. The high mechanical strength of Z85L provides excellent wear and abrasion resistant properties when used in dynamic applications. Its broad chemical resistance makes Z85L ideal for use with sour gas (H2S), crude oil, carbon dioxide and operating fluids including lubricators, drilling mud, oil additives and amine corrosion inhibitors. Key Attributes
Typical Applications
|
|
| RTP 600 HB | ABS | UL94 HB | |
| Ranger PBT PBT-403-M-G30 | PBT | Unreinforced grades have abundant strength and flexibility, and have strong characteristics against brittleness. UL-certified slow-burning(94HB) and self-extinguishing grades(94V-0,V-2) exist, and electrical properties exhibited are the highest of any thermoplastic. Low water absorption is exhibited, and excellent electrical properties(CTI and GWIT) are retained over extended periods of usages, even with widely varied temperature and humidity conditions. The surface of molded products is smooth, and a low coefficient of friction is exhibited.As the amount of froction is low, PBT is suitable for use in application requiring friction and wear properties. The material is exceptionally reliable, with small in-use dimensional variation, and superior molding stability and dimensional precision. Long-term chemical resistance is exceptional, and at room temperature, there is almost no degradation in properties after. Both unreinforced and reinforced grades exhibit exceptional flowability, and excellent processability. Application:VCD drive frames\ Connectors\ Trimmers\ Switch buttons for gas-fired instantaneous water heaters\ Relay blocks\ Driers\ Rectifiers\ Outer handles\ Height sensor cases\ Door mirror stays\ Drive component housings\ Energy saving lamp. |
|
| ResMart Ultra TPU 80A ES | TPU-聚脂 | Polyester based TPU Shore 80A hardness for injection molding or extrusion applications | |
| Sicoklar E81.22 | PC | PC, high flow V0 flame retardant grade only available in opaque colors | |
| THERMOLAST® K TF7STE (Series: FC/CS) | TPE | The FC/CS Series is your material solution for applications with food contact providing an excellent compression set. The series is available in translucent colors. Typical applications
Material advantages
|
|
| Wondel® C CSR0 | PC+ABS | Wondel® C CSR0是一种聚碳酸酯+丙烯腈丁二烯苯乙烯(PC+ABS)材料,。 该产品在亚太地区有供货,。 Wondel® C CSR0的主要特性有:
|
|
| Bayflex® XGT-140 | PUR-脂肪族/MDI | Bayflex XGT-140 is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. The system is supplied as two liquid components: Component A is a modified diphenylmethane diisocyanate (MDI), and Component B is a polyether polyol system. The extended gel time of Bayflex XGT-140 system gives equipment designers the flexibility to create large, complex parts that can be molded on existing injection machinery. The resin 's excellent surface quality and high impact resistance make it a candidate for agricultural equipment, heavy-duty trucks, specialty transportation, and marine applications. As with any product, use of the Bayflex XGT-140 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. |
|
| AFLAS® 150L | 氟橡胶 | Commercial polymers are classified into two types; one is the TFE-P dipolymer type (AFLAS® 100/150 Series), and the other is the TFE-P-VdF terpolymer type (AFLAS® 200Series). AFLAS® 200 Series is characterized by the improved low temperature properties, demoldability and metal bonding while maintaining most of the high heat and chemical resistance and electrical resistivity of the dipolymer. Below the current polymer grades are listed, which are mainly classified according to Mooney viscosity. Dipolymer is mostly used in the wire and cable, and automotive industries, while terpolymer is often favored for automotive use in terms of processability. | |
| Alathon® M6210 | HDPE，MMW | ALATHON M6210 is a medium molecular weight high density homopolymer. Typical applications for this resin are blown film, coextrusion and low WVTR. | |
| Cheng Yu NG1400S | 尼龙66 | Cheng Yu NG1400S是一种聚酰胺66（尼龙66）产品,含有的填充物为40% 玻璃纤维增强材料。 它,在亚太地区有供货。 主要特性为:阻燃/额定火焰。 | |
| DENISTAT P 20C 02 C | PP共聚物 | PP copo 20% carbon fiber reinforced, surface resistivity 10^2 ohm. | |
| Edgetek™ PI-30GF/000 | PEI | Edgetek®工程热塑性聚合物产品组合包括一系列标准和可定制的高性能材料。该组合包括耐高温材料，用于温度升高的工作环境，高模量/结构性材料则用于承重、高强度应用和阻燃产品。 这些聚合物是工程热塑性树脂与不同的增强添加剂混合而成的，如：碳纤维、玻璃纤维及玻璃珠。 | |
| ELEVATE™ EF524 | EVA | Westlake ELEVATE™ EF524 is an ethylene vinyl acetate copolymer with 14.5% VA. EF524 is designed for blown and cast filmsrequiring excellent optics and low heat seal initiation. High melt strength makes EF524 an excellent choice for profile extrusions, molding, and foaming applications requiring high VA content. Application/Uses: Flexible packaging films Peelable seals, adhesive layers Injection and blow molding Profile extrusions, tubing, wire & cable |
|
| HiPrene® MSG43 | PP，未指定 | HiPrene® MSG43E is a 30% glass fiber filled, impact modified polypropylene compound suitable for injection moulding. This material combines excellent impact/stiffness balance and high heat stability.This grade is available in natural or color-matched, pellet form. | |
| Pearlthane® 11T80 | TPU-Capro | PEARLTHANE 11T80 is a polycaprolactone-copolyester based TPU, supplied in form of translucent, colourless pellets, combining hardness with excellent mechanical properties as well as an improved transparency. It can be extruded and injection-moulded. PEARLTHANE 11T80 when extruded, is used for making films, tubing, profiles and a variety of technical components. When processed by injection moulding, can be used for making automotive parts and technical parts. |
|
| PLEXIGLAS® Tube GS | 丙烯酸 (PMMA) | PLEXIGLAS® XT rods and tubes are the clearest extruded tubes on the market today delivering brilliant quality, superior performance, and durability. PLEXIGLAS® XT rods and tubes are characterized by their flawless optics, and perfectly smooth surface free of striations. PLEXIGLAS® GS tubes are produced in the cast rotation process. Cast rods and square rods are made of casted semi-finished products. All cast forms have polished surfaces. Applications Due to the above characteristics PLEXIGLAS® rods and tubes are ideally suitable for.
|
| 拓展库2 | 种类 | 厂家 |
|---|---|---|
| DFDA-7043 | 线型低密度聚乙烯#线型高压聚乙烯 | 大庆石化 |
| S1005 | 聚丙烯#百折胶|软胶 | 台湾化纤 |
| HL001PF | 聚丙烯#百折胶|软胶 | 美国英力士 |
| F600HC | 聚丙烯#百折胶|软胶 | 美国Sunoco |
| 6630 | 改苯#高抗冲聚苯乙烯/改性聚苯乙烯 | 法国道达尔 |
| P3970H | 热塑性弹性体 | 南通普力马 |
| SP4030 | 线型低密度聚乙烯#线型高压聚乙烯 | 日本普瑞曼 |
| HD 5211 EA | 高密度聚乙烯#低压 | 黎巴嫩NASCO |
| 0470E | 热塑性弹性体 | 余姚兴旺 |
| LD 0304 | 低密度聚乙烯#高压聚乙烯 | 法国阿科玛 |
| 5000C | 聚丙烯#百折胶|软胶 | 广东聚石 |
| 1105-0779/WT | 聚醚醚酮树脂# | 德国雷曼福斯 |
| TA-1101FR | ABS与PC合金# | 凯乐亿美 |
| LGF60-PA66 | 聚亚己基己二酸酰胺#聚己二酰己二胺|尼龙66 | 美国PlastiComp |
| HF-3785AU | 热塑性弹性体橡胶 | 浙江华峰 |
| GFR 20 NATURAL | 聚亚己基己二酸酰胺#聚己二酰己二胺|尼龙66 | 土耳其EPSAN |
| BK8 | 聚已内酰胺#尼龙6 | 法国Eurostar |
| 115 GH | 聚亚己基己二酸酰胺#聚己二酰己二胺|尼龙66 | 美国Teknor Apex |
| 0514 | 聚甲醛#赛钢 | 意大利VAMP TECH |