| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 比重 | g/cc | g/cc | ASTM D792 |
| 密度 | g/cc | lb/in³ | ASTM D792 |
| g/cc | lb/in³ | ISO 1183 | |
| 水分吸收 | 23°C / 50% RH; ISO 62 | ||
| 饱和吸水率 | ISO 62 | ||
| 线性成型收缩率,Flow | cm/cm @Thickness 3.20 mm | in/in @Thickness 0.126 in | SABIC Method |
| 熔体流动速率 | g/10 min @Load 2.16 kg, Temperature 250 °C | g/10 min @Load 4.76 lb, Temperature 482 °F | ISO 1133 |
| g/10 min @Load 2.16 kg, Temperature 250 °C | g/10 min @Load 4.76 lb, Temperature 482 °F | ASTM D1238 | |
| g/10 min @Load 2.16 kg, Temperature 265 °C | g/10 min @Load 4.76 lb, Temperature 509 °F | ASTM D1238 | |
| g/10 min @Load 5.00 kg, Temperature 250 °C | g/10 min @Load 11.0 lb, Temperature 482 °F | ISO 1133 | |
| g/10 min @Load 5.00 kg, Temperature 250 °C | g/10 min @Load 11.0 lb, Temperature 482 °F | ASTM D1238 | |
| g/10 min @Load 5.00 kg, Temperature 266 °C | g/10 min @Load 11.0 lb, Temperature 511 °F | ASTM D1238 | |
| Melt Index of Compound | g/10 min @Load 2.16 kg, Temperature 250 °C | g/10 min @Load 4.76 lb, Temperature 482 °F | MVR [cm^3/10 min]; ISO 1133 |
| g/10 min @Load 2.16 kg, Temperature 265 °C | g/10 min @Load 4.76 lb, Temperature 509 °F | MVR [cm^3/10 min]; ISO 1133 | |
| g/10 min @Load 5.00 kg, Temperature 250 °C | g/10 min @Load 11.0 lb, Temperature 482 °F | MVR [cm^3/10 min]; ISO 1133 | |
| g/10 min @Load 5.00 kg, Temperature 265 °C | g/10 min @Load 11.0 lb, Temperature 509 °F | MVR [cm^3/10 min]; ISO 1133 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 抗张强度(断裂) | MPa | psi | 5 mm/min; ISO 527 |
| MPa | psi | 50 mm/min; ISO 527 | |
| MPa | psi | Type I, 10 mm/min; SABIC - Japan Method | |
| MPa | psi | Type I, 50 mm/min; ASTM D638 | |
| MPa | psi | Type I, 5 mm/min; ASTM D638 | |
| 抗张强度(屈服) | MPa | psi | 5 mm/min; ISO 527 |
| MPa | psi | Type I, 5 mm/min; ASTM D638 | |
| MPa | psi | Type I, 10 mm/min; SABIC - Japan Method | |
| MPa | psi | 50 mm/min; ISO 527 | |
| MPa | psi | Type I, 50 mm/min; ASTM D638 | |
| 伸长率 (断裂) | 5 mm/min; ISO 527 | ||
| Type I, 10 mm/min; SABIC - Japan Method | |||
| 50 mm/min; ISO 527 | |||
| Type I, 50 mm/min; ASTM D638 | |||
| Type I, 5 mm/min; ASTM D638 | |||
| 屈服伸长率 | Type I, 50 mm/min; ASTM D638 | ||
| 5 mm/min; ISO 527 | |||
| 50 mm/min; ISO 527 | |||
| Type I, 5 mm/min; ASTM D638 | |||
| Type I, 10 mm/min; SABIC - Japan Method | |||
| 拉伸模量 | GPa | ksi | 1 mm/min; ISO 527 |
| GPa | ksi | 50 mm/min; ASTM D638 | |
| GPa | ksi | 5 mm/min; ASTM D638 | |
| GPa | ksi | 10 mm/min; SABIC - Japan Method | |
| 弯曲强度 | MPa | psi | 1.3 mm/min, 50 mm span; ASTM D790 |
| MPa | psi | 1.3 mm/min, 50 mm span; ASTM D790 | |
| MPa | psi | 2 mm/min; ISO 178 | |
| 弯曲模量 | GPa | ksi | 1.3 mm/min, 50 mm span; ASTM D790 |
| GPa | ksi | 2 mm/min; ISO 178 | |
| 悬壁梁缺口冲击强度 | J/cm | ft-lb/in | ASTM D256 |
| J/cm @Temperature -40.0 °C | ft-lb/in @Temperature -40.0 °F | ASTM D256 | |
| J/cm @Temperature -30.0 °C | ft-lb/in @Temperature -22.0 °F | ASTM D256 | |
| J/cm @Temperature -10.0 °C | ft-lb/in @Temperature 14.0 °F | ASTM D256 | |
| J/cm @Temperature 0.000 °C | ft-lb/in @Temperature 32.0 °F | ASTM D256 | |
| J/cm @Temperature -20.0 °C | ft-lb/in @Temperature -4.00 °F | ASTM D256 | |
| kJ/m² | ft-lb/in² | 80*10*4; ISO 180/1A | |
| kJ/m² @Temperature -40.0 °C | ft-lb/in² @Temperature -40.0 °F | 80*10*4; ISO 180/1A | |
| kJ/m² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F | 80*10*4; ISO 180/1A | |
| kJ/m² @Temperature -20.0 °C | ft-lb/in² @Temperature -4.00 °F | 80*10*4; ISO 180/1A | |
| kJ/m² @Temperature -10.0 °C | ft-lb/in² @Temperature 14.0 °F | 80*10*4; ISO 180/1A | |
| kJ/m² @Temperature 0.000 °C | ft-lb/in² @Temperature 32.0 °F | 80*10*4; ISO 180/1A | |
| 简支梁缺口冲击强度 | J/cm² | ft-lb/in² | Edgew 80*10*4 sp=62mm; ISO 179/1eA |
| J/cm² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F | Edgew 80*10*4 sp=62mm; ISO 179/1eA | |
| 落锤总能量 | J | ft-lb | Instrumented Impact Energy @ peak; ASTM D3763 |
| J @Temperature -20.0 °C | ft-lb @Temperature -4.00 °F | Instrumented Impact, Energy @ peak, -20°C; ASTM D3763 | |
| J @Temperature -30.0 °C | ft-lb @Temperature -22.0 °F | Instrumented Impact Energy @ peak; ASTM D3763 | |
| J @Temperature -40.0 °C | ft-lb @Temperature -40.0 °F | Instrumented Impact Energy @ peak; ASTM D3763 | |
| J @Temperature -20.0 °C | ft-lb @Temperature -4.00 °F | ASTM D3763 | |
| J @Temperature 23.0 °C | ft-lb @Temperature 73.4 °F | ASTM D3763 | |
| J @Temperature -40.0 °C | ft-lb @Temperature -40.0 °F | ASTM D3763 | |
| J @Temperature -30.0 °C | ft-lb @Temperature -22.0 °F | ASTM D3763 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线形热膨胀系数 - 流动 | µm/m-°C @Temperature -40.0 - 95.0 °C | µin/in-°F @Temperature -40.0 - 203 °F | ASTM E 831 |
| µm/m-°C @Temperature -30.0 - 80.0 °C | µin/in-°F @Temperature -22.0 - 176 °F | ISO 11359-2 | |
| 线性热膨胀系数,横向流动 | µm/m-°C @Temperature -40.0 - 95.0 °C | µin/in-°F @Temperature -40.0 - 203 °F | ASTM E 831 |