| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | g/cc | lb/in³ | ISO 1183 |
| 平衡吸湿 | 23°C / 50% RH; ISO 62 | ||
| 饱和吸水率 | @Temperature 23.0 °C | @Temperature 73.4 °F | ISO 62 |
| 线性成型收缩率,Flow | cm/cm | in/in | on tensile bar; SABIC Method |
| 熔体流动速率 | g/10 min @Load 2.16 kg, Temperature 260 °C | g/10 min @Load 4.76 lb, Temperature 500 °F | [cm^3/10 min] Melt Volume Rate; ISO 1133 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 洛氏硬度（R 级） | ISO 2039-2 | ||
| 硬度，H358/30 | MPa | psi | ISO 2039-1 |
| 抗张强度(断裂) | MPa | psi | 5 mm/min; ISO 527 |
| 抗张强度(屈服) | MPa | psi | 5 mm/min; ISO 527 |
| 屈服伸长率 | 5 mm/min; ISO 527 | ||
| 拉伸模量 | GPa | ksi | 1 mm/min; ISO 527 |
| 弯曲强度 | MPa | psi | 2 mm/min; ISO 178 |
| 弯曲模量 | GPa | ksi | 2 mm/min; ISO 178 |
| 悬壁梁缺口冲击强度 | kJ/m² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F | 80*10*3; ISO 180/1A |
| kJ/m² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F | 80*10*4; ISO 180/1A | |
| kJ/m² @Temperature 23.0 °C | ft-lb/in² @Temperature 73.4 °F | 80*10*4; ISO 180/1A | |
| kJ/m² @Temperature 23.0 °C | ft-lb/in² @Temperature 73.4 °F | 80*10*3; ISO 180/1A | |
| 简支梁缺口冲击强度 | J/cm² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F | V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA |
| J/cm² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F | V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA | |
| J/cm² @Temperature 23.0 °C | ft-lb/in² @Temperature 73.4 °F | V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA | |
| J/cm² @Temperature 23.0 °C | ft-lb/in² @Temperature 73.4 °F | V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA | |
| 泰伯磨损，毫克/1000次 | @Load 1.00 kg | @Load 2.20 lb | CS-17; SABIC Method |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 体积电阻率 | >= ohm-cm | >= ohm-cm | IEC 60093 |
| 表面电阻 | >= ohm | >= ohm | ROA; IEC 60093 |
| 介电常数 | @Frequency 1.00e+6 Hz | @Frequency 1.00e+6 Hz | IEC 60250 |
| @Frequency 50.0 - 60.0 Hz | @Frequency 50.0 - 60.0 Hz | IEC 60250 | |
| 介电强度 | kV/mm @Thickness 3.20 mm | kV/in @Thickness 0.126 in | in oil; IEC 60243-1 |
| kV/mm @Thickness 1.60 mm | kV/in @Thickness 0.0630 in | in oil; IEC 60243-1 | |
| kV/mm @Thickness 0.800 mm | kV/in @Thickness 0.0315 in | in oil; IEC 60243-1 | |
| 耗散因数 | @Frequency 50.0 - 60.0 Hz | @Frequency 50.0 - 60.0 Hz | IEC 60250 |
| @Frequency 1.00e+6 Hz | @Frequency 1.00e+6 Hz | IEC 60250 | |
| 相比耐漏电起痕指数(CTI) | >= V | >= V | IEC 60112 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线形热膨胀系数 - 流动 | µm/m-°C @Temperature -40.0 - 40.0 °C | µin/in-°F @Temperature -40.0 - 104 °F | ISO 11359-2 |
| µm/m-°C @Temperature 23.0 - 60.0 °C | µin/in-°F @Temperature 73.4 - 140 °F | ISO 11359-2 | |
| 线性热膨胀系数,横向流动 | µm/m-°C @Temperature -40.0 - 40.0 °C | µin/in-°F @Temperature -40.0 - 104 °F | ISO 11359-2 |
| µm/m-°C @Temperature 23.0 - 60.0 °C | µin/in-°F @Temperature 73.4 - 140 °F | ISO 11359-2 | |
| 导热系数 | W/m-K | BTU-in/hr-ft²-°F | ISO 8302 |
| Hot Ball Pressure Test | <= °C | <= °F | IEC 60695-10-2 |
| 载荷下热变形温度(0.46 MPa) | °C | °F | Edgew 120*10*4 sp=100mm; ISO 75/Be |
| 载荷下热变形温度(1.8 MPa) | °C | °F | Edgew 120*10*4 sp=100mm; ISO 75/Ae |
| 维卡软化温度 | °C | °F | Rate B/50; ISO 306 |
| °C | °F | Rate B/120; ISO 306 | |
| UL RTI | °C | °F | UL 746B |
| UL RTI，机械冲击 | °C | °F | UL 746B |
| UL RTI，机械无冲击 | °C | °F | UL 746B |
| 可燃性(UL94) | @Thickness 1.00 mm | @Thickness 0.0394 in | UL 94 |
| @Thickness 1.20 mm | @Thickness 0.0472 in | UL 94 | |
| @Thickness 1.50 mm | @Thickness 0.0591 in | UL 94 | |
| @Thickness 2.00 mm | @Thickness 0.0787 in | UL 94 | |
| 极限氧指数 | LOI; ISO 4589 | ||
| 灼热丝试验 | °C @Thickness 3.20 mm | °F @Thickness 0.126 in | Glow Wire Flammability Index; IEC 60695-2-12 |
| 材料描述 | 测试方法 | |
|---|---|---|
| Ball Pressure Test, 75°C +/- 2°C | PASSES | IEC 60695-10-2 |