Availability: North America
Features: Fuel Resistant, Good Toughness, Oil Resistant, Hydrolytically Stable, Solvent Resistant, Good Abrasion Resistance
Appearance: Colorless
Forms: Pellets
Processing Method: Injection Molding and Extrusion
Information provided by Alliance Polymers| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | g/cc | lb/in³ | ASTM D792 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 肖氏硬度 (邵氏 A) | ASTM D2240 | ||
| 抗张强度(断裂) | MPa | psi | ASTM D412 |
| 抗张强度 | MPa @Strain 100 % | psi @Strain 100 % | ASTM D412 |
| MPa @Strain 300 % | psi @Strain 300 % | ASTM D412 | |
| 伸长率 (断裂) | ASTM D412 | ||
| 撕裂强度 | kN/m | pli | Die C; ASTM D412 |
| 泰伯磨损，毫克/1000次 | ASTM D1044 | ||
| 磨损 | mm<sup>3</sup>; DIN 53516 | ||
| 压缩永久变形 | @Temperature 22.8 °C, Time 79200 sec | @Temperature 73.0 °F, Time 22.0 hour | ASTM D3995B |
| @Temperature 70.0 °C, Time 259000 sec | @Temperature 158 °F, Time 72.0 hour | ASTM D3995B |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 维卡软化温度 | °C | °F | ASTM D1525 |
| 脆化温度 | °C | °F | ASTM D746 |
| 可燃性(UL94) | @Thickness 1.00 mm | @Thickness 0.0394 in | |
| @Thickness 1.50 mm | @Thickness 0.0591 in | ||
| @Thickness 3.00 mm | @Thickness 0.118 in |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 加工温度 | °C | °F | Injection |
| °C | °F | Gate Temperature; Extrusion | |
| 料筒后部温度 | °C | °F | Injection |
| 料筒中部温度 | °C | °F | Injection |
| 料筒前部温度 | °C | °F | Injection |
| 射嘴温度 | °C | °F | Injection |
| 1区 | °C | °F | Extrusion |
| 2区 | °C | °F | Extrusion |
| 3区 | °C | °F | Extrusion |
| 模具温度 | °C | °F | Extrusion |
| °C | °F | Injection | |
| 射速 | >= mm/sec | >= in/sec | Injection |
| 干燥温度 | °C | °F | Injection |
| °C | °F | Extrusion | |
| 干燥时间 | hour | hour | Injection |
| hour | hour | Extrusion | |
| 背压 | MPa | psi | Injection |
| Clamp Pressure | MPa | psi | Injection |
| 螺杆转速 | rpm | rpm | Injection |