Features: Excellent draw down and good processability.
Applications: Film extrusion: non-abrasive packaging applications.
FDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (c)2.2 under condition of use B through H described in Table 2 of 21 CFR 176.170
Film properties based on 1.0 guage (25 µm) thickness; blow-up ratio 2:1.
Information provided by Huntsman Corporation
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | g/cc | lb/in³ | ASTM D1505 |
| 厚度 | microns | mil | |
| 熔体流动速率 | g/10 min | g/10 min | ASTM D1238 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 肖氏硬度 (邵氏 D) | ASTM D2240 | ||
| 极限抗拉强度 | MPa | psi | ASTM D638 |
| 抗张强度(屈服) | MPa | psi | ASTM D638 |
| 断裂伸长率，MD | ASTM D882 | ||
| 断裂伸长率，TD | ASTM D882 | ||
| 伸长率 (断裂) | ASTM D638 | ||
| 弹性模量 | GPa | ksi | Secant; ASTM D638 |
| 割线模量(MD) | GPa | ksi | ASTM D882 |
| 割线模量(TD) | GPa | ksi | ASTM D882 |
| 落锤 | g/micron | g/mil | ASTM D1709 |
| 落锤试验 | g | lb | ASTM D1709 |
| 抗张强度(MD : 断裂) | MPa | psi | ASTM D882 |
| 抗张强度(TD : 断裂) | MPa | psi | ASTM D882 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 维卡软化温度 | °C | °F | ASTM D1525 |
| 光学性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 光泽度 | at 45°; ASTM D523 |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 加工（熔体）温度 | °C | °F |