DSM Akulon® S223-HG6 (Cond.) 30% Glass Reinforced Nylon 66 (North America)

Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.

Unfilled Extrusion Resins
Akulon resins are available with melt viscosities to suit all extrusion processes: barrier and coating film, tube and hose, monofilament, stock shapes. Akulon resins are characterized by:

• consistent quality
• high purity
• for film applications, low gel contents.

Molding Resins
Suited to all engineering demands:

• Unfilled low and medium viscosity grades
• Toughened unfilled grades
• Glass reinforced from 20-45% filled
• Low warpage reinforced grades
• Flame retardant; UL V0 rated and glow wire types
• Halogen free FR grades
• Blow moldable materials
• Laser markable resins
• Laser weldable, high burst pressure grades
• Toughened, reinforced resins
• High stiffness grades for metal replacement

Akulon Ultraflow resins have high flow with mechanical properties similar to standard materials. Exceptional flow allows:

• productivity gains in molding
• lower built in stresses
• better surface appearance
• system cost reductions

Applications for Molding resins There is an Akulon resin available suitable for any application requiring polyamides. Key areas where DSM has specific application knowledge are

• Automotive
  • Under the hood and engine components
  • Exterior and interior applications
  • Electrical components and connectors
• Electrical
  • Low voltage power distribution
  • Lighting
  • Power connectors
• Consumer Durables
  • Power and lawn and garden tools
  • Small Appliances
  • Sports and leisure equipment
  • Furniture accessories
  • Industrial Goods
  • Transportation (railways)

Information provided by DSM.

物理性能	额定值 (公制)	额定值 (英制)	测试方法
密度	g/cc	lb/in³	(DAM); ISO 1183
吸水率			(DAM); Sim. to ISO 62
平衡吸湿			Humidity Absorption (DAM); Sim. to ISO 62

机械性能	额定值 (公制)	额定值 (英制)	测试方法
抗张强度(断裂)	MPa	psi	ISO 527-1/-2
伸长率 (断裂)			ISO 527-1/-2
拉伸模量	GPa	ksi	ISO 527-1/-2
简支梁无缺口冲击强度	J/cm² @Temperature -30.0 °C	ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
	J/cm² @Temperature 23.0 °C	ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
简支梁缺口冲击强度	J/cm² @Temperature -30.0 °C	ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
	J/cm² @Temperature 23.0 °C	ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA
拉伸蠕变模量(1 hr)	MPa	psi	ISO 899-1

电气性能	额定值 (公制)	额定值 (英制)	测试方法
体积电阻率	ohm-cm	ohm-cm	IEC 60093
表面电阻	ohm	ohm	IEC 60093
介电常数	@Frequency 1e+6 Hz	@Frequency 1e+6 Hz	IEC 60250
	@Frequency 100 Hz	@Frequency 100 Hz	IEC 60250
介电强度	kV/mm	kV/in	IEC 60243-1
耗散因数	@Frequency 1e+6 Hz	@Frequency 1e+6 Hz	IEC 60250
	@Frequency 100 Hz	@Frequency 100 Hz	IEC 60250
相比耐漏电起痕指数(CTI)	V	V	IEC 60112

热性能	额定值 (公制)	额定值 (英制)	测试方法
熔融温度	°C	°F	10°C/min (DAM); ISO 11357-1/-3

材料描述		测试方法
Heat stabilized or stable to heat	Yes
注塑	Yes
Release Agent	Yes
With Fillers	Yes