Grade designation according to ISO 2580-ABS 1,MG,115-04-09-25
Very high heat injection moulding grade with good impact resistance for this category of ABS. Mainly used for automotive interior (dashboard inserts) and exterior (painted wheel covers) applications.
Unfilled. Suitable for Injection Molding. Supplied as pellets. Contains lubricant and release agent.
ISO data. Information provided by Enichem
Polimeri Europa now has Enichem's plastics businesses. This grade is no longer in the product line.| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | g/cc | lb/in³ | |
| 吸水率 | |||
| 平衡吸湿 | Humidity Absorption | ||
| 熔体流动速率 | g/10 min @Load 10.0 kg, Temperature 220 °C | g/10 min @Load 22.0 lb, Temperature 428 °F | cm³/10 min |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 抗张强度(屈服) | MPa | psi | 50 mm/min |
| 伸长率 (断裂) | Nominal | ||
| 屈服伸长率 | 50 mm/min | ||
| 拉伸模量 | GPa | ksi | 1 mm/min |
| 简支梁无缺口冲击强度 | J/cm² | ft-lb/in² | |
| J/cm² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F | ||
| 简支梁缺口冲击强度 | J/cm² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 电阻率 | ohm-cm | ohm-cm | |
| 表面电阻 | ohm | ohm | |
| 介电常数 | @Frequency 1e+6 Hz | @Frequency 1e+6 Hz | |
| @Frequency 100 Hz | @Frequency 100 Hz | ||
| 介电强度 | kV/mm | kV/in | |
| 耗散因数 | @Frequency 1e+6 Hz | @Frequency 1e+6 Hz | |
| @Frequency 100 Hz | @Frequency 100 Hz | ||
| 相比耐漏电起痕指数(CTI) | V | V |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线形热膨胀系数 - 流动 | µm/m-°C @Temperature 20.0 °C | µin/in-°F @Temperature 68.0 °F | |
| 载荷下热变形温度(0.46 MPa) | °C | °F | |
| 载荷下热变形温度(1.8 MPa) | °C | °F | |
| 维卡软化温度 | °C | °F | 50°C/hr; 50N |
| 玻璃化转变温度，Tg | °C | °F | 10°C/min test |
| 可燃性(UL94) | @Thickness 1.60 mm | @Thickness 0.0630 in | |
| @Thickness 3.10 mm | @Thickness 0.122 in |