| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 比重 | g/cc | g/cc | ASTM D792 |
| 密度 | g/cc | lb/in³ | ISO 1183 |
| 填料含量 | ASTM D229 | ||
| 水分吸收 | 23°C / 50% RH; ISO 62 | ||
| 饱和吸水率 | ISO 62 | ||
| 粘度 | cP | cP | Melt Viscosity, 260°C, 1500 sec-1; ISO 11443 |
| 线性成型收缩率,Flow | cm/cm | in/in | on Tensile Bar; SABIC Method |
| 线性成型收缩率，横向 | cm/cm | in/in | on Tensile Bar; SABIC Method |
| 熔体流动速率 | g/10 min @Load 5.00 kg, Temperature 266 °C | g/10 min @Load 11.0 lb, Temperature 511 °F | ASTM D1238 |
| Melt Index of Compound | g/10 min @Load 2.16 kg, Temperature 250 °C | g/10 min @Load 4.76 lb, Temperature 482 °F | MVR [cm^3/10 min]; ISO 1133 |
| g/10 min @Load 5.00 kg, Temperature 250 °C | g/10 min @Load 11.0 lb, Temperature 482 °F | MVR [cm^3/10 min]; ISO 1133 | |
| g/10 min @Load 5.00 kg, Temperature 265 °C | g/10 min @Load 11.0 lb, Temperature 509 °F | MVR [cm^3/10 min]; ISO 1133 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 洛氏硬度（R 级） | ISO 2039-2 | ||
| 硬度，H358/30 | MPa | psi | ISO 2039-1 |
| 抗张强度(断裂) | MPa | psi | Type I, 5 mm/min; ASTM D638 |
| MPa | psi | 5 mm/min; ISO 527 | |
| 抗张强度(屈服) | MPa | psi | Type I, 5 mm/min; ASTM D638 |
| MPa | psi | 5 mm/min; ISO 527 | |
| 伸长率 (断裂) | Type I, 5 mm/min; ASTM D638 | ||
| 5 mm/min; ISO 527 | |||
| Flexural Strain, break, 2 mm/min; ISO 178 | |||
| 屈服伸长率 | Type I, 5 mm/min; ASTM D638 | ||
| 5 mm/min; ISO 527 | |||
| 拉伸模量 | GPa | ksi | 1 mm/min; ISO 527 |
| GPa | ksi | 5 mm/min; ASTM D638 | |
| 弯曲强度 | MPa | psi | 1.3 mm/min, 50 mm span; ASTM D790 |
| MPa | psi | 2 mm/min; ISO 178 | |
| MPa | psi | 1.3 mm/min, 50 mm span; ASTM D790 | |
| MPa | psi | 2 mm/min; ISO 178 | |
| 弯曲模量 | GPa | ksi | 1.3 mm/min, 50 mm span; ASTM D790 |
| GPa | ksi | 2 mm/min; ISO 178 | |
| 悬壁梁缺口冲击强度 | J/cm | ft-lb/in | ASTM D256 |
| J/cm @Temperature 0.000 °C | ft-lb/in @Temperature 32.0 °F | ASTM D256 | |
| J/cm @Temperature -30.0 °C | ft-lb/in @Temperature -22.0 °F | ASTM D256 | |
| 悬壁梁无缺口冲击强度 | J/cm | ft-lb/in | ASTM D4812 |
| J/cm @Temperature -30.0 °C | ft-lb/in @Temperature -22.0 °F | ASTM D4812 | |
| 悬壁梁缺口冲击强度 | kJ/m² | ft-lb/in² | 80*10*4; ISO 180/1A |
| kJ/m² @Temperature 0.000 °C | ft-lb/in² @Temperature 32.0 °F | 80*10*4; ISO 180/1A | |
| kJ/m² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F | 80*10*4; ISO 180/1A | |
| 悬壁梁无缺口冲击强度 | kJ/m² | ft-lb/in² | 80*10*4; ISO 180/1U |
| kJ/m² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F | 80*10*4; ISO 180/1U | |
| 简支梁无缺口冲击强度 | J/cm² | ft-lb/in² | ISO 179/2C |
| J/cm² | ft-lb/in² | Edgew 80*10*4 sp=62mm; ISO 179/1eU | |
| J/cm² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F | Edgew 80*10*4 sp=62mm; ISO 179/1eU | |
| J/cm² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F | ISO 179/2C | |
| 简支梁缺口冲击强度 | J/cm² | ft-lb/in² | Edgew 80*10*4 sp=62mm; ISO 179/1eA |
| J/cm² | ft-lb/in² | ISO 179/2C | |
| J/cm² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F | Edgew 80*10*4 sp=62mm; ISO 179/1eA | |
| J/cm² @Temperature -30.0 °C | ft-lb/in² @Temperature -22.0 °F | ISO 179/2C | |
| 泰伯磨损，毫克/1000次 | CS-17, 1 kg; SABIC Method |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 体积电阻率 | ohm-cm | ohm-cm | ASTM D257 |
| ohm-cm | ohm-cm | IEC 60093 | |
| 表面电阻 | >= ohm | >= ohm | ROA; IEC 60093 |
| 介电常数 | @Frequency 1.00e+6 Hz | @Frequency 1.00e+6 Hz | ASTM D150 |
| @Frequency 1.00e+6 Hz | @Frequency 1.00e+6 Hz | IEC 60250 | |
| @Frequency 50.0 - 60.0 Hz | @Frequency 50.0 - 60.0 Hz | IEC 60250 | |
| 介电强度 | kV/mm @Thickness 3.20 mm | kV/in @Thickness 0.126 in | in oil; ASTM D149 |
| kV/mm @Thickness 3.20 mm | kV/in @Thickness 0.126 in | in oil; IEC 60243-1 | |
| kV/mm @Thickness 1.00 mm | kV/in @Thickness 0.0394 in | short time; IEC 60243-1 | |
| kV/mm @Thickness 1.60 mm | kV/in @Thickness 0.0630 in | in oil; ASTM D149 | |
| kV/mm @Thickness 1.60 mm | kV/in @Thickness 0.0630 in | in oil; IEC 60243-1 | |
| kV/mm @Thickness 0.800 mm | kV/in @Thickness 0.0315 in | in oil; IEC 60243-1 | |
| kV/mm @Thickness 0.800 mm | kV/in @Thickness 0.0315 in | in oil; ASTM D149 | |
| 耗散因数 | @Frequency 50.0 - 60.0 Hz | @Frequency 50.0 - 60.0 Hz | IEC 60250 |
| @Frequency 1.00e+6 Hz | @Frequency 1.00e+6 Hz | IEC 60250 | |
| @Frequency 1.00e+6 Hz | @Frequency 1.00e+6 Hz | ASTM D150 | |
| 耐电弧性 | sec | sec | Tungsten; ASTM D495 |
| 相比耐漏电起痕指数(CTI) | >= V | >= V | IEC 60112 |
| V | V | IEC 60112 | |
| V | V | UL 746A |