Mid-Mountain Materials THERMOSEAL® FIBERPAK® M77HS Moldable

Description: A family of high temperature moldables designed for a wide variety of uses. THERMOSEAL® FIBERPAK® MOLDABLES may be formed into shapes or linings, pushed into cracks and holes, or spread into thin sections as coating and separating mediums.

APPLICATION: THERMOSEAL® FIBERPAK® MOLDABLES are applied with the fingers, towels, spatulas, or from caulking guns. Gloves should be worn when hand applying. THERMOSEAL® FIBERPAK® MOLDABLES are easily formed to any contour or readily pressed into cracks and smoothed out. Water wet the tool to facilitate smoothing and contouring. Drying consists of removing the liquid portion of the mix usually by use of an external heat source at 220-200ºF • 95-150ºC for approximately six hours per inch of thickness.

USES:

• Trough linings for molten metal transfer
• High temperature sealing and coating
• Light weight refractory shape manufacture
• Trough coating and patching
• Furnace Patching

PACKAGING:

• 11 oz. Caulking tubes
• 32 oz. Caulking tubes
• One Gallon Bucket
• 5 Gallon Buckets
• 55 Gallon Drums

Information provided by Mid-Mountain Materials.

物理性能	额定值 (公制)	额定值 (英制)	测试方法
密度	g/cc	lb/in³	Fired Density at 2300°F
	g/cc	lb/in³	Wet Density
	g/cc @Temperature 121 °C	lb/in³ @Temperature 250 °F	Dry Density
固体含量			Wet

热性能	额定值 (公制)	额定值 (英制)	测试方法
最高工作温度, Air	°C	°F	Use Limit
流量	@Temperature 1260 °C	@Temperature 2300 °F

材料描述		测试方法
Alumina	41%	fired
外观	Sticky Putty
颜色	White
Description	Moldable
Silica	58%	fired