Availability: North America
Additive: Heat Stabilizer and UV Stabilizer
Features: Good Flow, Good UV Resistance and Heat Stabilized
Appearance: Black
Forms: Pellets
Processing Method: Extrusion and Injection Molding
Information provided by Alliance Polymers| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | g/cc | lb/in³ | ISO 2781 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 肖氏硬度 (邵氏 A) | ISO 868 | ||
| 抗张强度(断裂) | MPa | psi | ISO 37 |
| 抗张强度 | MPa @Strain 100 % | psi @Strain 100 % | ISO 37 |
| MPa @Strain 300 % | psi @Strain 300 % | ISO 37 | |
| 伸长率 (断裂) | ISO 37 | ||
| 撕裂强度 | kN/m | pli | ISO 34-1 |
| 永久压缩 | @Temperature 70.0 °C, Time 79200 sec | @Temperature 158 °F, Time 22.0 hour | ASTM D3995B |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 脆化温度 | °C | °F | ASTM D746 |
| 可燃性(UL94) | @Thickness 1.00 mm | @Thickness 0.0394 in | |
| @Thickness 1.50 mm | @Thickness 0.0591 in | ||
| @Thickness 3.00 mm | @Thickness 0.118 in |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 加工温度 | °C | °F | Gate Temperature; Extrusion |
| °C | °F | Injection | |
| 料筒后部温度 | °C | °F | Injection |
| 料筒中部温度 | °C | °F | Injection |
| 料筒前部温度 | °C | °F | Injection |
| 射嘴温度 | °C | °F | Injection |
| 1区 | °C | °F | Extrusion |
| 2区 | °C | °F | Extrusion |
| 3区 | °C | °F | Extrusion |
| 模具温度 | °C @Pressure 4.80 - 17.0 MPa | °F @Pressure 696 - 2470 psi | Extrusion |
| °C | °F | Injection | |
| 射速 | >= mm/sec | >= in/sec | Injection |
| 干燥温度 | °C | °F | Injection |
| °C | °F | Extrusion | |
| 干燥时间 | hour | hour | Injection |
| hour | hour | Extrusion | |
| 背压 | MPa | psi | Injection |
| Clamp Pressure | MPa | psi | Injection |
| 螺杆转速 | rpm | rpm | Injection |