Arlon Thermavac® 0.020" (0.508 mm) Uncured Silicone Vacuum Bagging (30400R020)

Uncured, unsupported silicone rubber with a thickness of 0.020 in ± 0.002 (0.51 mm ± 0.051) on a Kodacel carrier (0.005 in., 0.13 mm nominal thickness); 0.003 in. (0.08 mm) polyethylene interleave. The shelf life is defined as the duration of time for which the product will meet the physical requirements outlined below. It does not guarantee the product’s usefulness in all applications. Color: Red. Weight: 688.3 g/m² ± 67.8 (20.3 oz./yd.² ± 2.0). Shelf Life: 3 months from date of manufacture at 4.4°C (40°F). Cure Time: 0.5 hours. Post Cure: 204°C (400°F), for 4 hours.

Applications: Composite vacuum bagging materials.

Information provided by the manufacturer, Arlon Silicone Technologies Division.

机械性能	额定值 (公制)	额定值 (英制)	测试方法
肖氏硬度 (邵氏 A)
极限抗拉强度	MPa	psi
伸长率 (断裂)
撕裂强度	>= kN/m	>= pli
永久压缩			after post cure

电气性能	额定值 (公制)	额定值 (英制)	测试方法
介电强度	>= kV/mm	>= kV/in

热性能	额定值 (公制)	额定值 (英制)	测试方法
最高工作温度, Air	°C	°F
最低工作温度, Air	°C	°F

加工性能	额定值 (公制)	额定值 (英制)	测试方法
加工温度	°C	°F	curing temp., at 0.345 MPa (50 psi)