Description: SEB853 is a low density polyethylene produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel content. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866.
Applications: Typical blown film applications include films for diapers and other general purposes as well as LLDPE and HDPE blends.
Process: Blown and Cast Film Extrusion
搜物性提供30万余种物性表数据，如要查看关于 Braskem PE SEB853 完整物性数据，以及其替代物，黄卡信息，下载物性表PDF.
请 获得完整功能体验。
基本信息
特性
低速凝固晶点
光学性能
可更新资源
无 BPA
无添加剂
用途
薄膜
混合
通用
机构评级
FDA 21 CFR 177.1520
加工方法
薄膜挤出
吹塑薄膜
流延薄膜
物理性能
额定值
单位制
测试方法
密度
g/cm³
ASTM D1505
熔流率（熔体流动速率） (190°C/2.16 kg)
g/10 min
ASTM D1238
薄膜
额定值
单位制
测试方法
薄膜厚度 - 经测试
µm
抗张强度
ASTM D882
MD
: 断裂, 38 µm, 吹塑薄膜
MPa
ASTM D882
TD
: 断裂, 38 µm, 吹塑薄膜
MPa
ASTM D882
伸长率
ASTM D882
MD
: 断裂, 38 µm, 吹塑薄膜
%
ASTM D882
TD
: 断裂, 38 µm, 吹塑薄膜
%
ASTM D882
落锤冲击 1(38 µm, 吹塑薄膜)
g
ASTM D1709
埃尔曼多夫抗撕强度 -
TD (38 µm, 吹塑薄膜)
g
ASTM D1922
光学性能
额定值
单位制
测试方法
光泽度 (60°, 吹塑薄膜)
ASTM D2457
雾度 (吹塑薄膜)
%
ASTM D1003
补充信息
额定值
单位制
测试方法
生物质含量
%
ASTM D6866
Blown Film Properties: Obtained in 75mm extruder, blow up ratio 2:1, die gap 1.0mm and 38µm thickness.Recommended process conditions:Blown Film ExtrusionExtruder:Screw- relation L/D..........16 to 30:1Compression Ratio.........3 to 4:1Screw Package (Mesh)...40/60/40Temperature Profile:
1st zone............................110°C
Extruder..........................150°C
Die..................................160°C
Blow up ratio...................from 2 to 3:1Frostline Height...............maximum equivalent to bubble diameter
