DuPont Teijin Films Mylar® MDA Polyester Film, 92 Gauge

Mylar® MDA films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion, and processability. They are used for a broad range of industrial applications and may be suitable for use in medical applications.

General Product Info: Mylar® MDA films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -100°F to 300ºF. Mylar® does not become brittle with age under normal conditions, because it contains no plasticizers.

Typical Applications:

• Apparel stays
• Book jackets
• Carbon ribbon
• Control Tape
• Drumheads
• Duct Liners
• Identifications
• Medical Applications
• Membrane touch switches
• Metallized Base
• Pressure Sensitive Labels (plain or metallized)
• Protective surfacing
• Release liners
• Roll leaf (hot stamping)
• Spirit Masters

Approvals: FDA Food Contact Status - All gauges of Mylar® MDA comply with the Food and Drug Administration regulation 21 CFR 177.1630 -- Polyethylene phthalate polymers. This regulation describes films which may be safely used in contact with all types of food excluding alcoholic beverages. Uncoated films such as Mylar® MDA can be used to contain foods during oven cooking or oven baking at temperatures above 250 °F.

Information provided by DuPont.

物理性能	额定值 (公制)	额定值 (英制)	测试方法
密度	g/cc	lb/in³	Typical Mylar®; ASTM D1505

机械性能	额定值 (公制)	额定值 (英制)	测试方法
断裂伸长率，MD			ASTM D882A
断裂伸长率，TD			ASTM D882A
拉伸模量	GPa	ksi	ASTM D882
抗张强度(MD : 断裂)	MPa	psi	ASTM D882A
抗张强度(TD : 断裂)	MPa	psi	ASTM D882A

热性能	额定值 (公制)	额定值 (英制)	测试方法
比热容	J/g-°C	BTU/lb-°F	Typical Mylar®
熔融温度	°C	°F	Typical Mylar® via DSC
最高工作温度, Air	°C	°F
Maximum Service Temperature, Inert	°C	°F
收缩，MD	@Temperature 150 °C, Time 1800 sec	@Temperature 302 °F, Time 0.500 hour	Unrestrained
收缩，TD	@Temperature 150 °C, Time 1800 sec	@Temperature 302 °F, Time 0.500 hour	Unrestrained

光学性能	额定值 (公制)	额定值 (英制)	测试方法
折射率			typical of Mylar®
雾度			ASTM D1003
Transmission, Visible			transparent; thickness not quantified

材料描述		测试方法
Yield (nominal)	21500 in2/lb